ICOM iM422 Manuel d'utilisateur télécharger pdf (Page 17)

SCAN OPERATION

New2001

■ Setting TAG channels

For more efﬁcient scanning, add the desired channels as TAG

channels or clear the TAG for unwanted channels.

Channels that are not tagged will be skipped during scanning.

TAG channels can be assigned to each channel group (USA,

INT, CAN) independently.

q Push both [Y] and [Z] to select the desired channel group

(USA, INT or CAN.)

w Select the desired channel to be set as a TAG channel.

e Push [SCAN•

TAG] for 1 sec. to set the displayed channel

as a TAG channel.

•“ ” appears in the display.

r To cancel the TAG channel setting, repeat step e.

•“ ” disappears.

✔ Clearing (or setting) all tagged channels

While pushing [HI/LO] on the microphone, push [SCAN•

TAG]

for 3 sec. (until a long beep changes to 2 short beeps) to clear

all TAG channels in the channel group.

• Repeat above procedure to set all TAG channels.

■ Starting a scan

Set scan type (Priority or Normal scan) and scan resume

timer in advance, using Set mode. (p. 32)

q Push both [Y] and [Z] to select the desired channel group

(USA, INT, CAN) if desired.

w Set TAG channels as described at left.

e Make sure the squelch is closed to start a scan.

r Push [SCAN•

TAG] to start Priority or Normal scan.

•“ ” appears at the channel comment indicator during Pri-

ority scan.

•“ ” appears at the channel comment indicator during Normal

scan.

• When a signal is detected, scan pauses until the signal disap-

pears or resumes after pausing 5 sec. according to Set mode

setting. (Channel 16 is still monitored during Priority scan.)

• Push [Y] or [Z] to check the scanning TAG channels, to change

the scanning direction or resume the scan manually.

• A beep tone sounds and “” blinks at the channel comment in-

dicator when a signal is received on Channel 16 during Priority

scan.

t To stop the scan, repeat step r.

[Example]: Starting a Normal scan.

Push

Scan starts.

When a signal is

received.

Blinks Blinks

!IC-M422.qxd 05.2.23 2:20 PM Page 11 (1,1)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

ICOM iM422 Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Les radios bidirectionnelles ICOM iM422