ICOM iM72 Manuel d'utilisateur télécharger pdf (Page 20)

SCAN OPERATION

New2001

■ Scan types

Scanning is an efﬁcient way to quickly locate signals over a

wide frequency range. The transceiver has a priority scan set-

ting and normal scan setting.

In addition, the “Weather alert” and “Auto scan” functions are

also available for scanning. These functions can be activated

simultaneously, depending on the settings on the SET mode.

(pgs. 18, 19)

Set the TAG channels (scanned channel) before scanning.

Clear those TAG channels which are not needed or inconve-

niently stop scanning, such as digital communications.

Choose priority or normal scan on the SET mode.

(p. 18)

PRIORITY SCAN

Priority scan searches through all TAG channels in sequence

while monitoring Channel 16. When a signal is detected on

Channel 16, scan pauses until the signal disappears; when a

signal is detected on a channel other than Channel 16, scan

becomes dualwatch until the signal disappears.

WX*

CH 01

CH 16

CH 02

CH 05 CH 04

CH 03

* Previously selected weather channel

when weather alert function is ON

NORMAL SCAN

Normal scan, like priority scan, searches through all TAG

channels in sequence. However, unlike priority scan, Chan-

nel 16 is not checked unless Channel 16 is set as a TAG

channel.

CH 01 CH 02

WX*

CH 05 CH 04

CH 03

* Previously selected weather channel

when weather alert function is ON.

IC-M72_1.qxd 06.1.11 18:19 Page 14 (1,1)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Pas de commentaire

ICOM iM72 Manuel d'utilisateur Page 20