Icom DSC CONTROLLER DS-100 Manuel d'utilisateur télécharger pdf (Page 10)

CALL PROCEDURE

y Push UTC time with keypad.

• Push [Ω]/[≈] to move the cursor then push [Y]/[Z] to correct the

data

• Push [CLR] to Exit the menu.

• Push [A/a], then push [ENT] to enter ‘Null data’.

■ Distress call to ships

General DSC call with the ‘distress’ category may be used for

communications after the Distress call, e.g. you want to

change the operating mode, frequency, etc.

■ Individual call

q Push [CALL], then push [√]

several times to select ‘Indi-

vidual call’ then push [ENT].

w Push [√] several times to se-

lect the desired address,

then push [ENT].

• Enter the 9 digit ID when ‘Man-

ual entry’ is selected.

• Push [CLR] to exit the menu.

e Push [CALL] and [ENT] si-

multaneously to transmit an

Individual call.

r Push [CLR] to stop the call.

ID:(9digit)

<CLR"Exit / ENT"OK>

≈Manual entry

DS-100 SN10

DS100 SN2

DS100 SN3

<CLR"Exit / ENT"OK>

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Pas de commentaire

Icom DSC CONTROLLER DS-100 Manuel d'utilisateur Page 10