Icom IC-F610 Manuel d'utilisateur télécharger pdf (Page 26)

CONVENTIONAL MODE

‘‘

Conventional Mode operation

This transceiver has conventional mode capability. You can

use up to 32 pre-programmed conventional channels. These

channels can be selected with the [ ] or [ ].

➥Push the [Mode] key assigned as the dealer programma-

ble key to toggle between Trunking mode and Conventional

mode. The transceiver memorizes the operating mode until

Mode key is pushed, even if the power is turned OFF.

NOTE: You must assign the [Mode] function to a dealer pro-

grammable key, both for the Trunking mode and the

Conventional mode in the key Assign screen of the cloning

software.

•CTCSS tone squelch function is available in the

Conventional mode. You can select the desired operating

channel and make a communication with [PTT].

•While the Conventional mode is selected, the [Clear/P

key functions as [Monitor]. (Default setting.)

➥ Pushing this key allows you to open the transceiver’s

squelch manually to check whether a channel is busy

or not.

‘‘

Programmable key assignment

Dealer programmable keys [P0], [P1

], [P2], [P3], [P4], [OP F0],

[OP F1], [OP F2], [

∫∫

], [

√√

], [ ] and []can be pro-

grammed for one of several functions by your Icom dealer.

In the following explanations, programmable function names

are bracketed; the speciﬁc switch used to activate the func-

tion depends on programming.

Conventional mode only;

[Monitor]

The monitor function allows you to open the transceiver’s

squelch manually to check whether a channel is busy or

not.

[CH Up]/[CH Down]

Push to select the operating channel.

[Simplex]

The Simplex function changes duplex channels to simplex

channels.

Simplex allows you to contact other portable transceivers

directly.

IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 26 (1,1)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Icom IC-F610 Manuel d'utilisateur Page 26

Commentaires sur ces manuels

Produits connexes et manuels pour Stations de radio Icom IC-F610