Icom IC-M90 Manuel d'utilisateur télécharger pdf (Page 25)

SET MODE

D LCD contrast selection “LC”

The contrast of the LCD can be adjusted from 4 levels.

•

1 (bright)–4 (dark); 3 (default)

D Auto power save function “PS”

The auto power save function reduces current drain by deac-

tivating the receiver circuit for preset intervals.

• ON : The power save function is turned ON. The power save func-

tion will activate when no signal is received, and no operation

is performed for 5 sec.

• OFF: The power save function is turned OFF.

D Self check function “SC”

The self check function checks the transceiver conditions by

itself, and informs you in case a problem is found. Self check

automatically and quickly runs through its diagnostic steps

each time the radio is turned ON. Afterwards, the radio

switches to normal operation mode.

• Temperature : Outside of –35°C to +73°C; –31°F to +163°F

(approx.)

• Connected battery voltage

When error messages as shown below are displayed, see

troubleshooting for advice. (p. 28)

Push

default

bright

Push

Power save ON (default) Power save OFF

Push

Self check OFF (default) Self check ON

Temperature error Battery voltage error

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Pas de commentaire

Icom IC-M90 Manuel d'utilisateur Page 25